Pmod IA: Impedance AnalyzerKey Features➤ Impedance analyzer with a 12-bit impedance converter➤ Measure impedance values ranging from 100Ω to 10 MΩ.➤ Programmable frequency sweep➤ Programmable gain amp..
The SimpleLink Wi-Fi CC3120 wireless network processor enables the user to add Wi-Fi to any MCU. The CC3120 BoosterPack plug-in-module (CC3120BOOST) is a board which can easily be connected to TI’s MC..
Sub-1GHz RF Expansion Board Based On The SPSGRF-868 Module For STM32 NucleoKey Features➤ STM32 Nucleo expansion board based on the SPSGRF-868➤ 868 MHz ETSI-certified modules based on low power, low da..
Provides an easy-to-use solution for driving high power bipolar stepper motors in your STM32 Nucleo project.Key Features➤ Power system-in-package, integrated dual full-bridge with low RDS(on)➤ Voltage..
The X-NUCLEO-IHM07M1 is compatible with the ST Morpho connector and supports the addition of other boards which can be stacked with onto a single STM32 Nucleo board. The user can also mount the Arduin..
Enables to evaluate motor control solutions for three-phase motors by adapting the STM32 Nucleo board with an external ST motor control power board. The 34-pin motor control connector is compatible wi..
The X-NUCLEO-IHM11M1 is compatible with the Arduino UNO R3 connector and most STM32 Nucleo boards and is designed for six-step and FOC algorithms.Key Features➤ Low voltage range from 1.8 V to 10 V➤ Cu..
The X-NUCLEO-IHM12A1 is compatible with the Arduino UNO R3 connector and most STM32 Nucleo boards.Key Features➤ Low voltage range from 1.8 V to 10 V➤ Current up to 1.3 A r.m.s➤ Current control with ad..
The board is compatible with the Arduino UNO R3 connector layout and it is designed around the M24SR64-Y. The M24SR64-Y device is a dynamic NFC/RFID tag IC with a dual interface. It embeds a 64 Kbit E..
The X-NUCLEO-NFC02A1 is a dynamic NFC/RFID tag board based on M24LR04E-R, for expansion of STM32 Nucleo boards. The M24LR04E-R is an NFC Type V/RFID tag IC with a dual-interface 4 Kbit Electrically Er..
The X-NUCLEO-NFC04A1 dynamic NFC/RFID tag IC expansion board is based on the ST25DV04K NFC Type V/RFID tag IC with a dual interface 4 Kbits EEPROM that also features an I²C interface. It can be powere..
The X-NUCLEO-PLC01A1 allows the rapid evaluation of the ICs on board performing a basic set of PLC operations in conjunction with the X-CUBE-PLC1 software package.Key Features➤ Enables a PLC (Programm..
Evelta is one of the fastest growing distributor of Electronic Components in India. Our focus on customer satisfaction and expert technical support makes us ideal single point source for all your requirements.