Request for

Contact us at or 9819133129 to enquire about wholesale rates.

Read more

Quectel BG96 LTE Module- Embedded IoT Wireless Communication Module

Manufacturer: Quectel
Part No: BG96MA-128-SGN
Availability: Out Of Stock

Ask a question about this product

I wish to not have this question published

BG96 LTE Module Features

Power Supply

Supply voltage: 3.3V~4.3V, Typical supply voltage: 3.8V

Frequency Bands

FDD-LTE: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28

LTE-TDD: B39 (for Cat M1 only)

GSM: GSM850/EGSM900/DCS1800/PCS1900

GNSS: GPS, GLONASS, BeiDou/Compass, Galileo, QZSS

Transmitting Power

Class 3 (23dBm±2dB) for LTE-FDD bands
Class 3 (23dBm±2dB) for LTE-TDD bands
Class 4 (33dBm±2dB) for GSM850
Class 4 (33dBm±2dB) for EGSM900
Class 1 (30dBm±2dB) for DCS1800
Class 1 (30dBm±2dB) for PCS1900
Class E2 (27dBm±3dB) for GSM850 8-PSK
Class E2 (27dBm±3dB) for EGSM900 8-PSK
Class E2 (26dBm±3dB) for DCS1800 8-PSK
Class E2 (26dBm±3dB) for PCS1900 8-PSK

LTE Features

Support LTE Cat M1 and LTE Cat NB1
Support 1.4MHz RF bandwidth for LTE Cat M1
Support 200KHz RF bandwidth for LTE Cat NB1
Support SISO in DL direction
Cat M1: Max. 375Kbps (DL)/375Kbps (UL)
Cat NB1: Max. 32Kbps (DL)/70Kbps (UL)

GSM Features

Support GPRS multi-slot class 33 (33 by default)
Coding scheme: CS-1, CS-2, CS-3 and CS-4
Max. 107Kbps (DL), Max. 85.6Kbps (UL)
Support EDGE multi-slot class 33 (33 by default)
Support GMSK and 8-PSK for different MCS (Modulation and Coding Scheme)
Downlink coding schemes: CS 1-4 and MCS 1-9
Uplink coding schemes: CS 1-4 and MCS 1-9
Max. 296Kbps (DL), Max. 236.8Kbps (UL)

Internet Protocol Features

Support PPP/TCP/UDP/SSL/TLS/FTP(S)/HTTP(S) protocols
Support PAP (Password Authentication Protocol) and CHAP (Challenge Handshake Authentication Protocol) protocols which are usually used for PPP connections


Text and PDU mode
Point to point MO and MT
SMS cell broadcast
SMS storage: ME by default

USIM Interface

Support USIM/SIM card: 1.8V, 3.0V

Audio Features

Support one digital audio interface: PCM interface

USB Interface

Compliant with USB 2.0 specification (slave only) and the data transfer rate can reach up to 480Mbps
Used for AT command communication, data transmission, GNSS NMEA output, software debugging and firmware upgrade
Support USB serial drivers for Windows 7, Windows 8/8.1, Windows 10, Windows CE 5.0/6.0/7.0*, Linux 2.6/3.x/4.1~4.14, Android 4.x/5.x/6.x/7.x

UART Interface

Used for data transmission and AT command communication
115200bps by default
The default frame format is 8N1 (8 data bits, no parity, 1 stop bit)
Support RTS and CTS hardware flow control
Used for module debugging and log output
115200bps baud rate
Used for outputting GNSS data or NMEA sentences
115200bps baud rate

AT Commands

Compliant with 3GPP TS 27.007, 27.005 and Quectel enhanced AT commands

Network Indication

NETLIGHT pin for network activity status

Antenna Interface

Including main antenna (ANT_MAIN) and GNSS antenna (ANT_GNSS) interfaces

Physical Characteristics

Size: (26.5±0.15)mm × (22.5±0.15)mm × (2.3±0.2)mm
Weight: approx. 3.1g

Temperature Range

Operation temperature range: -35°C ~ +75°C
Extended temperature range: -40°C ~ +85°C
Storage temperature range: -40°C ~ +90°C

Firmware Upgrade

USB interface and DFOTA


All hardware components are fully compliant with EU RoHS directive

Download Documents

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Recently viewed

Powered By OpenCart
Evelta © 2019

Contact Us

How can we help ?