Categories

Request for
Quotation

Contact us at sales@evelta.com or 9819133129 to enquire about wholesale rates.

Read more
Quectel UC15-E UMTS/HSPA+ LTE Evaluation Board (EVB) Kit

Quectel UC15-E UMTS/HSPA+ LTE Evaluation Board (EVB) Kit

Manufacturer: Quectel
Part No: UC15-E-TE-A+UMTS-LTE-EVB-KIT
Availability: In Stock
₹5,940.00
-+

Ask a question about this product

I wish to not have this question published

UC15-E-TE-A + UMTS LTE-EVB-KIT


Development Tools

Interfaces  

-RS-232 interfaces  

-USB interface  

-Power supply  

-Antenna interface  

-Handset interface  

-Earphone interface  

-Test interface


Features  

-Digital or analog audio interface  

-Network status LED  

-Power key  

-Reset key

Main Features

Power Supply

Supply voltage: 3.3V~4.3V

Frequency Bands

UC15-E: GSM900/1800, UMTS900/2100

UC15-A: GSM850/900/1800/1900, UMTS850/1900

UC15-T: GSM850/900/1800/1900, UMTS850/2100

Transmission Data

HSDPA R5: Max 3.6Mbps (DL)

WCDMA R99: Max 384kbps (DL)/Max 384kbps (UL)

EDGE: Max 236.8kbps (support DL only)

GPRS: Max 85.6kbps (DL)/Max 85.6kbps (UL)

CSD: 64kbps

Transmitting Power

Class 4 (33dBm±2dB) for GSM850 and EGSM900

Class 1 (30dBm±2dB) for DCS1800 and PCS1900

Class 3 (24dBm+1/-3dB) for UMTS850/900/1900/2100

HSDPA and WCDMA

Features

HSDPA data rate corresponds with 3GPP R5. 3.6Mbps on downlink.

WCDMA data rate corresponds with 3GPP R99/R4. 384kbps on downlink and 384kbps on the uplink.

Support both 16-QAM and QPSK modulation.

GSM/GPRS/EDGE

Data Features

GPRS:

Support GPRS multi-slot class 12 (10 by default)

Coding scheme: CS-1, CS-2, CS-3 and CS-4

Maximum of four Rx time slots per frame

EDGE:

Support EDGE multi-slot class 12 (12 by default).

Support downlink only.

Support GMSK and 8-PSK for different MCS (Modulation and Coding scheme).

Downlink coding schemes: CS 1-4 and MCS 1-9.

CSD:

CSD transmission rates: 14.4kbps non-transparent.

Support Unstructured Supplementary Services Data (USSD).

Internet Protocol Features

Support TCP/UDP/PPP/FTP/HTTP/SMTP/MMS/SSL/PING/NITZ/ NTP/HTTPS/SMTPS protocols.

Support the protocols PAP (Password Authentication Protocol) and CHAP (Challenge Handshake Authentication Protocol) usually used for PPP connections

SMS

Text and PDU mode

Point to point MO and MT

SMS cell broadcast

SMS storage: ME by default

USIM Interface

Support USIM/SIM card: 1.8V, 3.0V

Audio Features

Support two analog input channels and two analog output channels

GSM: HR/FR/EFR/AMR/AMR-WB

WCDMA: AMR/AMR-WB

Echo cancellation and noise suppression

PCM Interface

Used for audio function with an external codec.

Support 8-bit A-law and μ-law, and 16-bit linear data formats.

Support long frame sync and short frame sync.

Support master and slave mode, but must be the master in long frame sync.

UART Interface

Seven lines on UART interface.

Support RTS and CTS hardware flow control.

Baud rate can reach up to 921600bps, 115200bps by default. Used for AT command, data transmission and firmware upgrade

USB Interface

Compliant with USB 2.0 specification (slave only), the data transfer rate can reach up to 480 Mbps at high-speed mode.

Used for AT command communication, data transmission, software debug and firmware upgrade.

USB driver: support Windows XP, Windows Vista, Windows 7, Windows 8, Windows CE5.0/6.0, Windows Mobile 6.1/6.5, Linux 2.6 or later, Android 2.3/4.0 or later.

AT Commands

Compliant with 3GPP TS 27.007, 27.005 and Quectel enhanced AT commands

Network Indication

Indicate network activity status

Antenna Interface

Connected via 50ohm antenna pad

Temperature Range

Normal operation: -35°C ~ +80°C

Restricted operation: -40°C ~ -35°C and +80°C ~ +85°C 1)

Storage temperature: -45°C ~ +90°C

Firmware Upgrade

USB interface (recommend) and UART interface

Resources

Download Documents


Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Recently viewed

Powered By OpenCart
Evelta © 2019

Contact Us

How can we help ?

Track Order