Request for

Contact us at or 9819133129 to enquire about wholesale rates.

Read more
Quectel BG96 LTE Evaluation Board (EVB) Kit

Quectel BG96 LTE Evaluation Board (EVB) Kit

Manufacturer: Quectel
Availability: In Stock

Ask a question about this product

I wish to not have this question published

Development Tools


-RS-232 interfaces  

-USB interface  

-Power supply  

-Antenna interface  

-Handset interface  

-Earphone interface  

-Test interface


-Digital or analog audio interface  

-Network status LED  

-Power key  

-Reset key

UMTS & LTE EVB Features

Power Supply

DC supply: 4.5~5.5V, typical 5V

UMTS & LTE TE-A Interface

Support UMTS<E modules:

Wi-Fi & Ethernet TE-A Interface

Support Wi-Fi modules: FC20/AF20

SD Interface

Support SD card

(U)SIM Interface

Support (U)SIM card insertion detection
Support (U)SIM card: 3.0V and 1.8V

Audio Interfaces

One digital audio codec board interface

Support Realteck ALC5616 and TI TLV320AIC3104 codec boards
Three analog interfaces used for loudspeaker, earphone and handset

UART Interfaces

Two UART interfaces:
COM1: serial interface for data communication
Max baud rate: 460800bps;
COM2: serial interface for debug purpose
Default baud rate: 115200bps

USB Interface

USB 2.0

Signal Indication

5 LEDs are available for signal indication

Button and Switches

Power Switch (S201), PWRKEY (S302), RESET (S303), PWRDWN_N (S301), BT Function Switch (S901)

BG96 LTE Module Features

Power Supply

Supply voltage: 3.3V~4.3V, Typical supply voltage: 3.8V

Frequency Bands

FDD-LTE: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28

LTE-TDD: B39 (for Cat M1 only)

GSM: GSM850/EGSM900/DCS1800/PCS1900

GNSS: GPS, GLONASS, BeiDou/Compass, Galileo, QZSS

Transmitting Power

Class 3 (23dBm±2dB) for LTE-FDD bands
Class 3 (23dBm±2dB) for LTE-TDD bands
Class 4 (33dBm±2dB) for GSM850
Class 4 (33dBm±2dB) for EGSM900
Class 1 (30dBm±2dB) for DCS1800
Class 1 (30dBm±2dB) for PCS1900
Class E2 (27dBm±3dB) for GSM850 8-PSK
Class E2 (27dBm±3dB) for EGSM900 8-PSK
Class E2 (26dBm±3dB) for DCS1800 8-PSK
Class E2 (26dBm±3dB) for PCS1900 8-PSK

LTE Features

Support LTE Cat M1 and LTE Cat NB1
Support 1.4MHz RF bandwidth for LTE Cat M1
Support 200KHz RF bandwidth for LTE Cat NB1
Support SISO in DL direction
Cat M1: Max. 375Kbps (DL)/375Kbps (UL)
Cat NB1: Max. 32Kbps (DL)/70Kbps (UL)

GSM Features

Support GPRS multi-slot class 33 (33 by default)
Coding scheme: CS-1, CS-2, CS-3 and CS-4
Max. 107Kbps (DL), Max. 85.6Kbps (UL)
Support EDGE multi-slot class 33 (33 by default)
Support GMSK and 8-PSK for different MCS (Modulation and Coding
Downlink coding schemes: CS 1-4 and MCS 1-9
Uplink coding schemes: CS 1-4 and MCS 1-9
Max. 296Kbps (DL), Max. 236.8Kbps (UL)

Internet Protocol Features

Support PPP/TCP/UDP/SSL/TLS/FTP(S)/HTTP(S) protocols
Support PAP (Password Authentication Protocol) and CHAP (Challenge Handshake Authentication Protocol) protocols which are usually used for PPP connections


Text and PDU mode
Point to point MO and MT
SMS cell broadcast
SMS storage: ME by default

USIM Interface

Support USIM/SIM card: 1.8V, 3.0V

Audio Features

Support one digital audio interface: PCM interface

USB Interface

Compliant with USB 2.0 specification (slave only) and the data transfer rate can reach up to 480Mbps
Used for AT command communication, data transmission,

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Recently viewed

Powered By OpenCart
Evelta © 2019

Contact Us

How can we help ?