Description
The CYBLE-212020-EVAL EZ-BLE PRoC Evaluation Board enables the user to evaluate and develop applications with the CYBLE-212020-01 EZ-BLE Module.
Key Features:
- The EZ-BLE Module includes only 23 GPIOs
- Cmod- A 2.2-nF capacitor mounted on the evaluation board used with the CY8CKIT-042-BLE capacitive sensing slider, buttons, and proximity sensors.
- J3 Header- A two-pin header that exposes VDD and VDDR. This header can be used to short the VDDR power connection to VDD. This jumper must be shorted when using the CYBLE-212020-EVAL with the MiniProg3 kit due to the fact that the MiniProg3 kit only supplies VDD to the evaluation board. When using the CYBLE-212020-EVAL in conjunction with the CY8CKIT-042-BLE Pioneer kit, these jumper connections do not matter, and they can be connected or disconnected.
- J4 Header- A 10-pin header is attached CYBLE-212020-EVAL kit that exposes connections used for programming and debugs with the MiniProg3 kit
Standalone Usage: The CYBLE-212020-EVAL board can also be programmed and debugged with the PSoC MiniProg3 Program and Debug Kit (CY8CKIT-002) and PSoC Creator.
Relevant Resources:
