LSM303D 6DoF Motion Sensor Breakout I2C

No reviews yet Write a Review
SKU:
170-PIM376
Manufacturer Part No:
PIM376
₹970.13 inc. GST
₹822.15 ex. GST

Description

This 6 Degrees of Freedom Motion Sensor Breakout can detect acceleration in three axes - X, Y, and Z - as well as three axes of magnetic heading. It's ideal for building into robots, rockets, and rovers, or anywhere else where you want to measure motion accurately. It's compatible with Raspberry Pi or Arduino. The LSM303D 6DoF Breakout has an I2C interface and is 3.3V or 5V compatible.

Note: The trace between the solder pads (marked ADDR) can be cut (carefully with a craft knife) to change the I2C address from the default of 0x1D to 0x1E, meaning that you can use up to two sensors on the same Raspberry Pi or Arduino. If cut, the pads can be bridged again by soldering to reset the address to 0x1D.
 
Features
  • LSM303D 6DoF Motion Sensor
  • +-2/+-4/+-8/+-12 gauss magnetic scale
  • +-2/+-4/+-6/+-8/+-16 g linear acceleration
  • 16 bit data output
  • 3.3V or 5V compatible
  • I2C interface, with address select via ADDR cuttable trace (0x1D or 0x1E)
  • Reverse polarity protection
  • Raspberry Pi-compatible pinout (pins 1, 3, 5, 7, 9)
  • Compatible with Raspberry Pi 3B+, 3, 2, B+, A+, Zero, and Zero W
  • Dimensions: 19x19x3mm
Kit Contents
  • LSM303D 6DoF Motion Sensor Breakout
  • 1x5 male header
  • 1x5 female right angle header
Resources

Extra Information

Manufacturer:
Pimoroni

Warranty Information

All the products supplied by Evelta are genuine and original. We offer 14 days replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.