Description
The nRF52840 DK is a versatile single board development kit for Bluetooth 5, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary applications on the nRF52840 SoC. It also supports development for the nRF52811 SoC.
It facilitates development exploiting all features of the nRF52840 SoC. It includes an NFC antenna that quickly enables utilization of the NFC-A tag peripheral. All GPIOs are available via edge connectors and headers, and 4 buttons and 4 LEDs simplify input and output to and from the SoC. It is Arduino Uno Revision 3 compatible, making it possible to mount 3rd-party shields with ease. It comes with an on-board SEGGER J-Link debugger allowing programming and debugging both the on-board SoC and external SoCs through the debug out header. It also interfaces directly with the Power Profiler Kit.
- Affordable, single-board development kit for the nRF52811 and nRF52840 SoCs
- Bluetooth 5 multiprotocol radio
- 2 Mbps
- Long Range
- Advertising Extensions
- Channel Selection Algorithm - IEEE 802.15.4 radio support
- Thread
- Zigbee - Arm CortexTM-M4 with floating point support
- DSP instruction set
- Arm CryptoCell CC310 cryptographic accelerator
- Arduino Rev3 compatible connector for use with 3rd party shields
- All I/Os (48) and interfaces available via connectors
- Segger J-Link OB programming/debugging supported
- Support for programming/debugging of external boards
- USB interface direct to nRF52840 SoC
- USB interface to power and program/debug
- External memory on-board
- Integrated 2.4 GHz PCB antenna
- NFC antenna
- Connector for external NFC antenna
- SWF RF connector for direct RF measurements
- Pins for power consumption measurements
- 4 x user-programmable buttons
- 4 x user-programmable LEDs
- Coin-cell battery holder
- 1.7-5.5 V supplied from battery, external or USB
-
1 x nRF52840 Preview DK board
-
1 x 2032 battery
-
1 x NFC antenna
