Raspberry Pi Expansion Board, Supports Arduino and XBee - Waveshare

No reviews yet Write a Review
Evelta SKU:
Manufacturer Part Number:
₹1,840.80 inc. GST
₹1,560.00 ex. GST
Request a quote for higher quantities


Adapter Board for Arduino & Raspberry Pi


  1. ARPI600 x 1
  2. USB type A plug to mini-B plug cable x 1
  3. RPi screws pack (2pcs) x 1


Arduino is a massive ecosystem, if there's a way for the Raspberry Pi GPIO interface to adapt to Arduino pinouts, it is possible to use the Pi together with vast Arduino shields and hardware/software resources. The ARPI600 is just intended for this.

What's more, the ARPI600 also support XBee modules, make it easy to add wireless feature to your great project.

Supported Pi

  1. Raspberry Pi 1 Model A+
  2. Raspberry Pi 1 Model B+
  3. Raspberry Pi 2 Model B
  4. Raspberry Pi 3 Model B

ARPI600 Features

  1. Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields
  2. XBee connector for connecting various XBee modules
  3. Sensor interface for connecting various sensors
  4. Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter
  5. Onboard ADC, 10 bit, 38KSPS, 11 channels (6 channels for Arduino interface, 5 channels for sensors)
  6. Onboard RTC

What's on the ARPI600


  1. Arduino connector : for connecting Arduino shields
  2. ICSP interface : Arduino ICSP
  3. XBee connector : for connecting XBee communication modules
  4. Sensor interface : for connecting sensors
  5. Raspberry Pi connector : for connecting Raspberry Pi
  7. TLC1543 : AD converter
  8. PCF8563 : RTC
  9. CP2102
  10. 32.768KHz crystal : for RTC
  11. Power indicator
  12. XBee state LED
  13. XBee and Arduino interface RESET button
  14. XBee EASYLINK button
  15. RTC battery holder : for CR1220 button battery
  16. TLC1543 reference voltage configuration jumper
  17. RTC jumper
  18. UART jumper
    1. when connecting P_RX and CP_TX, P_TX and CP_RX respectively, USB TO UART is connected to Raspberry Pi serial port
    2. when connecting XB_RX and CP_TX, XB_TX and CP_RX respectively, USB TO UART is connected to XBee serial port
    3. when connecting XB_RX and P_TX, XB_TX and P_RX respectively, Raspberry Pi serial port is connected to XBee serial port
  19. Arduino AD selection jumper
    1. short 2 and 3 : Arduino A0-A5 as AD input
    2. short 1 and 2 : Arduino A0-A5 as digital control
  20. Arduino I2C selection jumper
    1. short the jumper : Arduino A4-A5 as I2C control (the A4-A5 of Arduino AD selection jumper should be opened)
  21. Arduino SPI selection jumper
    1. short 1 and 2 : Arduino D11-D13 as SPI control (default)
    2. short 2 and 3 : Arduino D11-D13 as digital control

Development Resources


Wiki : www.waveshare.com/wiki/ARPI600


ARPI600 Dimension



Extra Information


Warranty Information

All the products supplied by Evelta are genuine and original. We offer 14 days replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.