Categories

Request for
Quotation

Contact us at sales@evelta.com or 9819133129 to enquire about wholesale rates.

Read more
High-performance Arm Cortex-M3 MCU

STM32F207VET6 - High-performance Arm Cortex-M3 MCU

Manufacturer: STMicroelectronics
Part No: STM32F207VET6
Availability: In Stock
₹460.00
-+

Ask a question about this product

I wish to not have this question published

The STM32F20x family is based on the high-performance ARM Cortex-M3 32-bit RISC core operating at a frequency of up to 120 MHz. The family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 128 Kbytes of system SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.


Key Features

Core

ARM 32-bit Cortex-M3 CPU (120 MHz
max) with the Adaptive real-time accelerator (ARTAccelerator) allowing 0-wait state execution performance from Flash memory, MPU,150 DMIPS/1.25 DMIPS/MHz

Memories

– Up to 1 Mbyte of Flash memory
– 512 bytes of OTP memory
– Up to 128 + 4 Kbytes of SRAM
– Flexible static memory controller that
supports Compact Flash, SRAM, PSRAM,
NOR and NAND memories
– LCD parallel interface, 8080/6800 modes

Clock, reset and supply management

– From 1.8 to 3.6 V application supply + I/Os
– POR, PDR, PVD and BOR
– 4 to 26 MHz crystal oscillator
– Internal 16 MHz factory-trimmed RC
– 32 kHz oscillator for RTC with calibration
– Internal 32 kHz RC with calibration

Low-power modes

– Sleep, Stop and Standby modes
– VBAT supply for RTC, 20 × 32 bit backup
registers, and optional 4 KB backup SRAM

ADC

3 × 12-bit, 0.5 μs ADCs with up to 24 channels and up to 6 MSPS in triple interleaved mode

D/A converter

2 × 12-bit

General-purpose DMA

16-stream controller with centralized FIFOs and burst support

Timers

Up to twelve 16-bit and two 32-bit timers,
up to 120 MHz, each with up to four
IC/OC/PWM or pulse counter and
quadrature (incremental) encoder input

Debug mode

Serial wire debug (SWD), JTAG,
and Cortex-M3 Embedded Trace Macrocell

I/O ports with interrupt capability

– Up to 136 fast I/Os up to 60 MHz
– Up to 138 5 V-tolerant I/Os

communication interfaces

– Up to 3 × I2C interfaces (SMBus/PMBus)
– Up to four USARTs and two UARTs
(7.5 Mbit/s, ISO 7816 interface, LIN, IrDA,
modem control)
– Up to three SPIs (30 Mbit/s), two with
muxed I2S to achieve audio class accuracy
via audio PLL or external PLL
– 2 × CAN interfaces (2.0B Active)
– SDIO interface

Advanced connectivity                                                                                                                          

– USB 2.0 full-speed device/host/OTG
controller with on-chip PHY
– USB 2.0 high-speed/full-speed
device/host/OTG controller with dedicated
DMA, on-chip full-speed PHY and ULPI
– 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

camera interface

8- to 14-bit parallel camera interface
(48 Mbyte/s max.)

Industrial temperature range

–40 to 85 °C


Datasheet

Write a review

Note: HTML is not translated!
    Bad           Good

Recently viewed

Powered By OpenCart
Evelta © 2019

Contact Us

How can we help ?