Description
The STM32H735G-DK Discovery kit is a complete demonstration and development platform for Arm Cortex-M7 core-based STM32H735IGK6U microcontroller, with 1 Mbyte of Flash memory and 564 Kbytes of SRAM. The STM32H735G-DK Discovery kit is used as a reference design for user application development before porting to the final product, thus simplifying the application development.
- STM32H735IGK6U microcontroller featuring 1 Mbyte of Flash memory and 564 Kbytes of SRAM in UFBGA176+25 package
- 4.3" TFT 480×272 pixels colored LCD module with capacitive touch panel and RGB interface
- Ethernet compliant with IEEE-802.3-2002 and PoE (Power over Ethernet)
- USB OTG FS
- SAI audio codec
- One ST-MEMS digital microphone
- 512-Mbit Octal-SPI NOR Flash memory
- 128-Mbit HyperRAM
- Two user LEDs
-
User and reset push-buttons
-
Fan-out daughterboard
-
Three CAN FDs
-
Board connectors:
- USB FS Micro-AB
- USB ST-LINK Micro-B
- Ethernet RJ45
- Stereo headset jack including analog microphone input
- Audio header for external speakers
- microSD card
- TAG connector 10-pin footprint
- SMA connector
- Arm Cortex 10-pin 1.27 mm-pitch debug connector over STDC14 footprint
- ARDUINO Uno V3 expansion connector
- STMod+ expansion connector
- Pmod Type-2A and Type-4A expansion connector
- Audio MEMS daughterboard expansion connector
-
Flexible power-supply options:
- STLINK-V3E USB connector
- USB OTG FS connector
- 5 V delivered by RJ45 (Power over Ethernet)
- 5 V delivered by ARDUINO
- USB charger
-
On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
-
Comprehensive free software libraries and examples available with the STM32CubeH7 MCU Package
-
Support of a wide choice of Integrated Development Environments (IDEs) including IAR, Keil, and STM32CubeIDE